> For the complete documentation index, see [llms.txt](https://dev.solid-run.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://dev.solid-run.com/procedures/amd/projects/solidrun/com7-v3000.md).

# COM7 V3000

Prepared by Lior Jigalo

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FgeDsORQEh9SctqvUq8vo%2Fimage.png?alt=media&amp;token=9755ae9d-c0ba-4230-a5d6-d2892448a223" alt=""><figcaption></figcaption></figure>

### Test Procedure

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FfEaqH1Xm6TmqUimcydhF%2Fimage.png?alt=media&amp;token=84751473-988e-44bf-92b2-4796d295f0f3" alt=""><figcaption></figcaption></figure>

### Revision notes

<table><thead><tr><th width="106.76171875">Date</th><th width="476.73046875">Change</th><th>Author</th></tr></thead><tbody><tr><td>04.11.2026</td><td>Initial document</td><td>Lior Jigalo</td></tr></tbody></table>

### Test Jig items

<table><thead><tr><th width="194.66015625">Name</th><th width="156.9296875">Picture</th><th width="164.3359375">Min QTY
(Recommended QTY)</th><th width="236.77734375">Comment</th></tr></thead><tbody><tr><td>Carrier for testing</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FfabigZnBSFnf3io5bXZN%2Fimage.png?alt=media&amp;token=8adbbc39-9738-4c0f-b092-2bbf1675beba" alt=""></td><td>1</td><td></td></tr><tr><td>7+ port switch</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F5XsazCK7e6MG84az3IM3%2Fimage.png?alt=media&amp;token=b2b40834-5589-44c6-bb46-58b06762c02e" alt=""></td><td>1</td><td>For connecting all bedrock interfaces to<br>clearfog.</td></tr><tr><td>Dediprog<br>SF600Plus SPI NOR Flash<br>Programmer</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FiJfxvgzvnMZS7hnu8X7h%2Fimage.png?alt=media&amp;token=2dfc0db8-b8ef-407f-951b-310ee037f648" alt=""></td><td>1</td><td>For flashing the BIOS image on the SOM</td></tr><tr><td>PMIC programmer</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F5brrIlRF9F0nQDhibUuL%2Fimage.png?alt=media&amp;token=bc9fb8f6-5610-4d07-a1a5-d6467e83ca5b" alt=""></td><td>1</td><td>For flashing CPU voltages</td></tr><tr><td>ATX power supply</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FrBmtodzGXVOIWJIfhqyV%2Fimage.png?alt=media&amp;token=b98b40d7-7672-4801-8317-a59c48aeee30" alt=""></td><td>1</td><td></td></tr><tr><td>DC cable with jack</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FF3tAV53dZ1VUZ5UDelDa%2Fimage.png?alt=media&amp;token=667219fb-ac60-4b46-b85c-a727b6047c9a" alt=""></td><td>1</td><td></td></tr><tr><td>SFP DAC ccable (*)</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FNtzc47pNJpKpY78tJWmf%2Fimage.png?alt=media&amp;token=49fe64b7-6bf4-4225-90cd-846c588e504a" alt=""></td><td>1</td><td></td></tr><tr><td>NVME M.2 2280 with latch</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F8s28TIHeWp1Y2KlrlxJL%2Fimage.png?alt=media&amp;token=e57c5056-039b-4e25-a468-14d9092a4edf" alt=""></td><td>3 (6)</td><td>4 units recommended for higher testing rate<br>2x should already be on pre-assembled SX<br>1x for NVME on SOM</td></tr><tr><td>Plastic spudger for board<br>extraction</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F3wWuEPjoLJ4E7aB9Ho0z%2Fimage.png?alt=media&amp;token=a6179006-fc44-4438-a2bb-c8407410c5a5" alt=""></td><td>1</td><td></td></tr><tr><td>USB 2.0 atx connector</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FMtNzsSsoEhS5mx5pY6tA%2Fimage.png?alt=media&amp;token=ac3f35a9-3539-425a-9080-ebe59a39bb15" alt=""></td><td>1</td><td></td></tr><tr><td>USB 3.0 atx connector</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FhUi8JRjrAEAdwFDxjJUN%2Fimage.png?alt=media&amp;token=3ba919f7-0f8c-48fd-ae1e-139c10448ed7" alt=""></td><td>1</td><td></td></tr><tr><td>USB 3.0 thumb drive<br><br><br>Thumb drive with pre-installed<br>test image</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F8ytpMQ0of1ZFFk3Y5qcg%2Fimage.png?alt=media&amp;token=17141181-ff5f-451b-a0b3-a4fe725ba138" alt=""></td><td>2<br><br>1 (2)</td><td>Bootable, with Linux and test script.<br>Extra thumb drive recommended to continue<br>test if main gets corrupted</td></tr><tr><td>USB 2.0 thumb drive</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FJ4xvk2v2z4Mlwec4fMag%2Fimage.png?alt=media&amp;token=08fd5300-ec3b-48b8-a7eb-feb542bdb790" alt=""></td><td>2</td><td></td></tr><tr><td>SATA cable</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2Fgf48hi1NHoZxof2PP5HO%2Fimage.png?alt=media&amp;token=d612cde0-5494-4ed5-b980-0a0d5d13439f" alt=""></td><td>1</td><td></td></tr><tr><td>Sata SSD</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FGmEMUNMYjYbWxfGtCQBm%2Fimage.png?alt=media&amp;token=e808f7d1-22de-4dc7-bde9-5ee85ffb5d37" alt=""></td><td>2</td><td></td></tr><tr><td>USB to Ethernet adapter</td><td><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FKM6ZWzQ9UYJLGCiXpWEK%2Fimage.png?alt=media&amp;token=b7a7954f-1af7-4e3c-a239-e14743485c02" alt=""></td><td>1</td><td>For connecting test jig to local router</td></tr></tbody></table>

### Test Jig Setup

Carrier panel connectors

1. Connect an Ethernet cable into the Ethernet switch and attach it to the carrier.
2. Connect the test image USB Thumb drive to the front USB 3.0 interface.
3. Connect 1x USB 3.0 thumb drive to the front USB 3.0 interface.
4. Connect 2x SFP DAC cables to the switch.
5. Connect the USB 3.0 splitter to the USB 3.0 header
6. Connect 2x USB 3.0 thumb drives to the splitter
7. Connect the USB 2.0 splitter to the USB 2.0 header
8. Connect 2x USB 2.0 thumb drives to the splitter
9. Connect an NVME drive to the carrier
10. Attach an x8 PCIE device to the PCIE connector

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FXcQDFXID1fHj58JGv0l4%2Fimage.png?alt=media&amp;token=ebad75a6-60e9-405d-ad8f-4c09a63f91bd" alt=""><figcaption></figcaption></figure>

### Network and devices setup

The test setup includes:

1. Test jig
2. SolidRun PC
3. Barcode Scanner
4. local router
5. Hub router
6. Label printer
7. SolidRun main server
8. 8 port switch

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FwOfry2mKL4orqkNH7XSz%2Fimage.png?alt=media&amp;token=d533f30c-36b9-4e92-a082-f1596ba6b0bb" alt=""><figcaption></figcaption></figure>

* Barcode scanner (3) is connected to SolidRun PC (2) via USB.
* SolidRun PC (2) is connected to the local router (4).
* Test jig (1) is connected through a USB-to-Ethernet adapter to a switch (8).
* Test jig (1) is connected with all internet interfaces to a switch (8).
* Local router (4) is linked to a hub router (5).
* Local router (4) is linked to a switch (8).
* Label printer (6) is connected to the hub router (5).
* Hub router (5) is connected to a local printer.
* Hub router (5) is connected to SolidRun main server (7) over the internet.

### Labels Placement

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FscVl0WweFp66EKnEjVd3%2Fimage.png?alt=media&amp;token=55cc64ec-941c-48a3-acd1-da83e4f6db00" alt=""><figcaption></figcaption></figure>

**NOTE: All labels can be pasted in advance.**

1. connect DediProg to the unit on C4173 location on the COM.

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F3JKdcDD9YXY81cv5smjX%2Fimage.png?alt=media&amp;token=25dcb4f1-9016-4ea0-b0ea-47c005e210f3" alt=""><figcaption></figcaption></figure>

2. Open the DediProg engineering software.
3. After the main window opens press on detect.
4. Navigate to the BIOS Binary file (provided above or by SolidRun engineer) and confirm selection.
5. Press on: batch and wait for the process to finish.

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FbdD55p3DQfgySaoObbSE%2Fimage.png?alt=media&amp;token=05b47ec9-857d-41df-96b0-3e6f8ef3c13d" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2Fk0EbpmaPfOcQ2EcANoIB%2Fimage.png?alt=media&amp;token=fa23697a-e400-4871-92e3-7d164fb4d8a0" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2Fiuo8ud5VWjhI8SgKKb3W%2Fimage.png?alt=media&amp;token=987f2ba2-1467-4f43-907a-5e7255b7a4b9" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FtwbnCWQuPbEM9t6S5Gu1%2Fimage.png?alt=media&amp;token=e806966c-6385-480e-b882-92cc6ccc0c97" alt=""><figcaption></figcaption></figure>

### Flashing BIOS

1. connect DediProg to the unit on C4173 location on the COM.

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F3JKdcDD9YXY81cv5smjX%2Fimage.png?alt=media&amp;token=25dcb4f1-9016-4ea0-b0ea-47c005e210f3" alt=""><figcaption></figcaption></figure>

2. Open the Communications and telecom Core software
3. Click on scan on the lower left side of the screen
4. Click on the chips name that appeared after the scan
5. After the message: All registered have been read appears, click OK
6. Click on Sys.config
7. Browse for the .XLSX file (can be downloaded from the urls above) that contains the configuration
8. After the message: All registered have been written appears, click OK
9. Click on NVM.Write
10. After the message: All registered have been read appears, click OK

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FDWM7ZM8TxEhyyaZSJAg3%2Fimage.png?alt=media&amp;token=a3ce7477-d039-4529-9f02-9d428a1d0672" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FJdlSJjjRJuRbPDgiGQkV%2Fimage.png?alt=media&amp;token=f6d5415b-6e6e-4fdd-91f7-6d2fcee0b878" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F1H7XVuvm1lkQRoH4xaK8%2Fimage.png?alt=media&amp;token=d2e81b17-cddd-463c-984a-b88be23257ec" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FTD60dWjG7LFcjDZts4rR%2Fimage.png?alt=media&amp;token=ea9ad2fb-c40b-449e-b90d-a318d9b6d6a1" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FtsT7FfgFsVXDq3dIOvrc%2Fimage.png?alt=media&amp;token=682f4a05-8fc7-40db-b3fe-a230d824de66" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FXrY5MzZHcHX4xfSbmUOp%2Fimage.png?alt=media&amp;token=f2bef988-3441-41ad-a637-c799dd009d2c" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FfzBuxgrkiwVtxI6lKAzS%2Fimage.png?alt=media&amp;token=7f0ab839-eb80-4d89-8f5e-654ca99dd23e" alt=""><figcaption></figcaption></figure>

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2Fq952B0zsg4FBO86eYpB8%2Fimage.png?alt=media&amp;token=2dc10a57-1952-43f1-ae25-f1b8956952eb" alt=""><figcaption></figcaption></figure>

### Preparing COM DUT

1. Install two RAM modules on COM
2. Insert an NVME drive in the NVME slot on the carrier.
3. Connect DC cord to COM.&#x20;

   **Important: Ensure PSU is disconnected from the test jig!**

## Preparing COM DUT

1. **Important: Ensure PSU is disconnected from the test jig!**

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FSfWy4ZuFUTqALb9UImIn%2Fimage.png?alt=media&amp;token=f023a1fb-3bb5-4db0-9178-a7af23321f6e" alt=""><figcaption></figcaption></figure>

2. Lower COM DUT onto the carrier.
3. Press firmly on the COM until you feel the board to board connectors click into place like in the picture below.

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F9iRREOSgnBqXcMKfREwv%2Fimage.png?alt=media&amp;token=4352f047-6511-48f9-85ee-aa903c130d97" alt=""><figcaption></figcaption></figure>

## Running test procedure

1. Select the Automatic test to start testing as shown in the figure below:

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FD6mo2ATGKUr0fiBwIGMr%2Fimage.png?alt=media&amp;token=4a65ce14-8222-4fa6-a1f0-2eb3e19bf56a" alt=""><figcaption></figcaption></figure>

2. When message below shows, use barcode scanner to scan the SX DUT label

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F9L4yCCGuoygl1pQEx5Wc%2Fimage.png?alt=media&amp;token=5f879a6e-48b7-4920-9283-a56c4be9b623" alt=""><figcaption></figcaption></figure>

3. When window below shows, press ‘Run tests’ button

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FkaBaXmHAYdb6QvEI9N3x%2Fimage.png?alt=media&amp;token=db29fdf4-1101-4841-8469-73a000752f6c" alt=""><figcaption></figcaption></figure>

4. Follow instructions on screen during the various functional tests
5. If functional test is successful, the following window shows:

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FKdwnAUqzAQEetqKOkCOF%2Fimage.png?alt=media&amp;token=7e5abd8d-da66-404a-87bc-da53af53bb7d" alt=""><figcaption></figcaption></figure>

If test fails, the following window shows:

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FXzwYaWkAHJ29uTK41OJs%2Fimage.png?alt=media&amp;token=741b13e1-d3d5-426c-a825-0a797998bc63" alt=""><figcaption></figcaption></figure>

Mark the DUT as failed and pass it to repair.

#### COM connector (C3173):

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F0iUBFW5fyM4GdatSLjy0%2Fimage.png?alt=media&amp;token=808e541d-f551-4b9f-9435-9f4a9467c682" alt=""><figcaption></figcaption></figure>

#### DediProg (BIOS):

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FeWkmozcDwL7U5L716Mmr%2Fimage.png?alt=media&amp;token=bae1c418-dd9b-45a3-bf9e-775213530df0" alt=""><figcaption></figcaption></figure>

#### MPS programmer connector (PMIC):

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2F5NgJJO4XhcsXDpWq0YMS%2Fimage.png?alt=media&amp;token=8fe8d865-8641-4ce8-87c7-c938c4d0c10b" alt=""><figcaption></figcaption></figure>

#### MPS programmer preparation:

<figure><img src="https://1088183085-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJFLva22tpaI24LDZcexP%2Fuploads%2FGgHmmkTEJj36aCfnopNW%2Fimage.png?alt=media&amp;token=0269627d-5158-4826-ad21-fb1901a7204c" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://dev.solid-run.com/procedures/amd/projects/solidrun/com7-v3000.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
